These five points determine the success of epoxy grout caulking!-Epoxy Grout & Adhesive & Sealant

Home page

These five points determine the success of epoxy grout caulking!

Nowadays, homeowners pay more and more attention to the decoration of their homes. Many homeowners will outsource the decoration of their homes to the construction team. The quality of the decoration can be seen with the naked eye in many places, but the tile gaps may not be visible with the naked eye. Now, I will tell you how to make the tile gaps made of epoxy grout "beautiful"!

1. Is the epoxy grout completely dry after doing caulking/grouting?

The most important thing when using epoxy grout for tile gap filling is that the tile gaps must be dry and clean, so you need to check whether the tile gaps are dry and clean before the construction master starts construction. After the construction is completed, you can also check whether there are many impurities in the tile gaps.

2. Did the construction master handle the details of the internal & external corners well?

As the saying goes, "details determine success or failure", so in the construction process of epoxy grout, the internal & external corners are the "details". When checking the results of the grouting, look at the details of the internal & external corners. Check whether there is any excess epoxy grouts at the internal & external corners and whether the gaps of the internal & external corners are filled. If the internal & external corners made by the grouting master are well handled, then it means that other places will not be too bad.

3. Is the surface of the grouting smooth?

Normally, the epoxy caulking made with epoxy grout are smooth after drying. If you can't tell whether the grouting are smooth, then touch the surface of the grouting gap with your hand to see if there are any bumps. If there are bumps, then you should pay attention, because the construction master may have mixed impurities in the epoxy grout.

4. Check whether the epoxy grout is wear-resistant after curing

Epoxy grout has strong wear resistance. If you scratch the tile gaps after the epoxy grout has cured and there are obvious marks and cracks, it may be that your epoxy grout has not been completely cured, or the epoxy grout used by the construction master is not very good.

5. Check whether the tiles and epoxy grout will split after construction

If a large amount of epoxy grout is brought out when you wipe it with a scouring pad after a period of time, it means that the adhesion of the epoxy grout is not strong. At this time, you still need to ask the master whether the epoxy grout used doesn’t meet the standards.